| 输送带粘接方法 |
| 添加时间：2019/11/16 13:30:23 浏览次数： |
| 粘接方法： Bonding method: 1、胶带粘接有：上复盖胶；下复盖胶；胶布层； 粘合面 1. Adhesive tape: upper covering adhesive; lower covering adhesive; adhesive layer; bonding surface （1）、对接：是使胶带接头两端相应的芯层（胶布层）， 处在同一级阶梯上对口相接。（2）、搭接：是使胶带接头两端相应的芯层，分别处在差一级的阶梯上对口相接。 (1) butt joint: it is to make the corresponding core layer (adhesive layer) at both ends of the tape joint butt joint on the same step. (2) lapping: it is to make the corresponding core layers at both ends of the adhesive tape joint, which are respectively connected on the ladder of the first level. 2、一般，帆布胶带的硫化胶接，常采用对接。因为这种接头形式完全可以满足强的不高的胶带使用，而且胶接简单，方便。搭接用于要求强度比较高的胶带硫化胶接，如尼龙布芯层胶带等。 2. Generally, the vulcanized rubber joint of canvas tape is usually butt joint. Because this kind of joint form can completely meet the use of strong and low adhesive tape, and the bonding is simple and convenient. Lap joint is used for vulcanized rubber joint with high strength, such as nylon cloth core layer tape, etc. （1）、直角形（或称直角），剖切口与胶带中心线成直角； (1) right angle (or right angle), the cut is at right angle to the center line of the tape; （2）、斜角形或称斜口，剖切口与胶带中心线成斜角； (2) bevel, or inclined mouth, with the incision inclined to the center line of the tape; （3）、人字形或对斜口，剖切口与胶带中心线成对称形双斜角。 (3) for herringbone or diagonal opening, the cut and the belt center line form a symmetrical double oblique angle. |
| 上一页 输送带在使用过程中主要与哪些部位发生摩擦？ |
| 下一页 输送带各种部件所用的胶料第一种：覆盖胶 |
Copyright © 技术支持：遨游网络