| 输送机在长时间、高强度的运输过程 |
| 添加时间：2021/9/18 15:58:11 浏览次数： |
| 输送机在长时间、高强度的运输过程，输送带表面很容易出现撕裂划伤，局部破损等问题，不及时修补就会对正常生产造成影响。 In the long and high intensity transportation process, the surface of the conveyor belt is prone to laceration, partial damage and other problems. If it is not repaired in time, it will have an impact on normal production. 经检查发现输送带的工作面有一处“U”型裂口，为了避免停产维修造成损失，企业将输送带开裂处用钢扣进行了固定，但此种方法不具备粘合性能，没有从根本上解决问题，不仅使用寿命较短，修补部位在经过清扫器时可能会造成再次撕裂。 After inspection, it is found that there is a "U" type crack in the working face of the conveyor belt. In order to avoid the loss caused by shutdown and maintenance, the enterprise fixes the crack of the conveyor belt with steel buckle. However, this method does not have adhesion performance and has not fundamentally solved the problem. Not only is the service life short, but the repair part may cause re-tear when it passes through the sweeper. 针对这种情况，应采用橡胶修复剂对输送带进行快速修补。橡胶修复剂有操作简便、固化速度快、填充性好、粘接强度高等特点，固化铜钟 一次性止血带 标志桩模具 钢丝轮 流水槽模具 防撞墙模具 检查井钢模具 不锈钢铸件 模锻件后具有良好的耐磨性、防腐性和优异的抗拉强度。即修即用，可降低设备故障率，延长输送带寿命。 In view of this situation, rubber repair agent should be used to repair the conveyor belt quickly. Rubber repair agent has the characteristics of simple operation, fast curing speed, good filling and high bonding strength. After curing, it has good wear resistance, corrosion resistance and excellent tensile strength. Instant repair can reduce the failure rate of equipment and prolong the service life of conveyor belt |
| 上一页 硫化机规格影响输送带接头长度。 |
| 下一页 EP输送带特点: |
Copyright © 技术支持：遨游网络