| 检重秤的纵向撕裂一般主要发生在输送机的装载点 |
| 添加时间：2019/6/27 15:20:45 浏览次数： |
| 检重秤的纵向撕裂一般主要发生在输送机的装载点，输送带纵向撕裂原因可以分为几下类，具有摩擦性质的利器和长条木材等异物刺穿输送带并卡在漏斗溜槽输送机机架或是托辊上，而输送带随着设备的向前速运转，皮带被异物划裂。 Longitudinal tearing of weighing scale generally occurs at the loading point of conveyor. The causes of longitudinal tearing of conveyor belt can be divided into several categories. Foreign bodies such as frictional sharp tools and long strips of wood pierce conveyor belt and stick on conveyor frame or roller of funnel chute. With the forward speed of equipment, conveyor belt is split by foreign bodies. 当这些异物落下时被卡阻在落煤漏斗或溜间，在漏斗或溜槽中煤压力和皮带对其摩擦力的作用下，这些异物持续摩擦划擦和卡压输送带，愈卡愈紧。给输送带的压力也愈来愈大，使其对输送带的划伤迅速加深，最终扎穿输送带并撕裂快违运转的输送带。 When these foreign bodies fall, they are blocked in the coal hopper or chute. Under the action of coal pressure and belt friction in the funnel or chute, these foreign bodies continue to friction, scratch and clamp the conveyor belt, and the tighter the clamp is. The pressure on the conveyor belt is also increasing, which makes the scratches on the conveyor belt deepen rapidly, and eventually pierce the conveyor belt and tear the conveyor belt which is fast violating the operation. 所以，当我们发现设备皮带跑偏之后，就应该检查设备传输皮带之间是否有残留物在阻碍称重皮带的正常运转，减少设备不必要的损耗。 Therefore, when we find out that the belt of the equipment has run off, we should check whether there are any residues between the belt of the equipment to prevent the normal operation of the weighing belt and reduce unnecessary wear and tear of the equipment. |
| 上一页 输送带出现边沟的问题原因主要有两个 |
| 下一页 NN输送带相对EP输送带要柔软一点 |
Copyright © 技术支持：遨游网络