一、硫化机规格影响输送带接头长度。输送带接头硫化机常见规格有1000mm、830mm、700mm等等，这样对应最佳接头长度800mm、630mm、500mm。1000mm长主要做钢丝绳输送带接头用，比较常用的是830mm的硫化机，一般情况下能满足大部分使用要求。700mm硫化机最近几年才流行，因为轻便，常用于带宽比较窄、带长比较短的输送带接头。一般输送带接头长度的计算首先根据硫化机规格。
I. The specification of vulcanizer affects the length of conveyor belt joint. The common specifications of conveyor belt joint vulcanizer are 1000mm, 830mm, 700mm, etc., which corresponds to the optimal joint length of 800mm, 630mm, 500mm. 1000mm long is mainly used as the joint of steel wire rope conveyor belt, and 830mm vulcanizer is commonly used, which can meet most of the use requirements in general. 700mm vulcanizer is popular in recent years. Because of its portability, it is often used in conveyor belt joints with narrow belt width and short belt length. Generally, the length of conveyor belt joint is calculated according to the specification of vulcanizer.
二、输送带接头价格影响输送带的接头长度。输送带接头服务商一般根据输送带接头长度来计算输送带接头价格，接头价格一般是一板的价格，每增加一板价格上浮80%~100%不等。有些厂家会因为价格原因，采用比较短的输送带接头长度。
2. The joint price of conveyor belt affects the joint length of conveyor belt. The service provider of conveyor belt joint generally calculates the price of conveyor belt joint according to the length of conveyor belt joint. The price of joint is generally the price of one plate, and the price of each additional plate rises by 80% ~ 100%. Some manufacturers will use shorter belt joint length for price reasons.